Four-band Remote Control Signal Jammer/Civilian Handheld Remote
Control Signal Shielding Device
Description:
This four-band remote control signal blocker is a kind of shield
that integrates multiple frequency segments in the civilian shield.
It includes common remote control signals, so for some cameras with
general remote control, the bugs include none. Both the HMI and
remote control signals can be blocked. If you are looking for a
civilian handheld remote control signal shielding device, you can
meet your needs.
Parameter:
| Operating voltage | DC9V (built-in rechargeable lithium battery(1600mAh) |
| Operating Current | 400mA (Four Frequency) |
| Operating frequency | 315MHz,330MHz,390MHz,433MHz |
| Coverage radius | 30-100M |
| Dimensions | 190*130*35MM (including antenna) |
| Power adapter | DC9V/1A |
| Colour | Black |
| Material | ABS |
Instructions:
1. Open the package and screw the instrument antenna to the antenna
socket on the back of the instrument. Tighten to prevent abnormal
operation.
2. You need to charge for 2-3 hours before you can use it. The
factory power of the product is only about 50%. (Low battery will
directly affect the use of results)
3. Press the front red power switch, the red color indicator light,
the monitor emits 315MHz,330MHz,390MHz,433MHz wireless signal. That
is, press the front red power switch again, the red indicator will
turn off and the monitor will stop working.
4. The frequency defaults to 433MHz for ANT1, 330MHz for ANT2,
390MHz for ANT3, and 315MHz for ANT4 (from left to right)
Precautions:
1. Never use a non-dedicated power adapter to plug into the power
input.
2. There is danger of electricity in the host, please do not open
the back cover to avoid electric shock and affect the warranty.
3. Turn off the power and unplug the power plug when you are not
using it for a long time or when you are away for a long time.
4. Please use in a suitable shielded environment, so as not to
affect the use of effects.
5. Avoid exposure, rain, water droplets, long-term exposure to high
temperature and humidity.
6. The effective range of the instrument is a circular area
centered on the main unit. Therefore, when using it, be careful to
select the correct position of the instrument to avoid blind
corners.
7. This product is a sensitive instrument for remote control
products. It will shield the remote control signals such as
electric cars, automobiles, remote control doors, access control,
etc. Please use it rationally.
