RC02D dual frequencies signal monitor
315MHz/433MHz Remote Control Jammer/ Portable Car Tracking Remote
jammer
Product introduction
This product is a high power dual frequency wireless transmitter.
Within a certain range,wireless signals of the same frequency can
be shielded and used specifically for certain occasions that use
radio devices for cheating, remote control electronics,remote
weighbridges and other cheating, examination rooms, hotels,
conferences, etc. making cheating wireless signals invalid. The
factory frequency (default) is set to 315MHz and 433MHz. Other
frequencies can also be customized according to customer
requirements.
Parameter:
| Operating voltage | DC9V (built-in rechargeable lithium battery (800mAh)) |
| Operating current | 240mA (dual frequency) |
| Working frequency | 315/433 MHz |
| Coverage radius | 30-100M |
| Dimensions | 210*60*25MM (including antenna) |
| Power adapter | DC9V/1A |
| Colour | Black |
| Material | Aluminum Alloy |
Instructions
1.Open the package and screw the instrument antenna to the antenna
socket on the back of the instrument. Tighten to prevent abnormal
operation.
2.You need to charge 3-4 hours before you can use it. The factory
power of the product is only about 50%. (Low battery will directly
affect the use of results)
3.Press the side power switch, the blue indicator light, the
monitor emits 315MHz,433MHz wireless signal. That is, press the
side power switch again, the blue indicator will turn off and the
monitor will stop working.
4.Frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to
right)
Precautions:
1. Never use a non-dedicated power adapter to plug into the power
input
2. There is danger of electricity in the host, please do not open
the back cover to avoid electric shock and affect the warranty.
3. Turn off the power and unplug the power plug when you are not
using it for a long time or when you are away for a long time.
4. Please use in a suitable shielded environment, so as not to
affect the use of effects.
5. Avoid exposure, rain, water droplets, long-term exposure to high
temperature and humidity.
6. The effective range of the instrument is a circular area
centered on the main unit. Therefore, when using it, be careful to
select the correct position of the instrument to avoid blind
corners.
7. This product is a sensitive instrument for remote control
products. It will shield the remote control signals such as
electric cars, automobiles, remote control doors, access control,
etc. Please use it rationally.
